Type-C Fiber Optic Cable 15M, Powerful 8K@60Hz, 60W PD, 10Gbps | Dtech DT-TF600

What Is a Type-C Fiber Optic Cable?

A Type-C fiber optic cable replaces the copper wiring inside a standard Type-C cable with an active optical core, so it can carry full-spec video, data, and power far beyond the 1–2 metre limit that copper runs into. The DTECH DT-TF600 is a full-function Type-C fiber optic cable built for exactly that job: connect one end to your source device (laptop, PC, media player) and the other to your display, dock, or receiving device, and you get full 8K/4K video, 10Gbps data, and 60W charging at up to 15 metres — in one cable, with no external power supply and no signal booster required.

For background on the standards this cable is built to, see the official DisplayPort Alt Mode documentation from VESA and the USB-C and Power Delivery specifications from the USB Implementers Forum — both are worth a look if you want to confirm what your specific device supports before buying any Type-C fiber optic cable.

Key Features

Here’s what sets this Type-C fiber optic cable apart from a standard copper Type-C cable:

15-Meter Active Optical Run Where copper Type-C cables top out around 1–2 metres for full-spec performance, the DT-TF600 holds full video, data, and power delivery over a 15-metre fiber optic run — one cable, one connection, no repeaters.

Adaptive DP Alt-Mode (4-Lane or 2-Lane) Automatically matches your device’s output: 4-Lane DP2.1 + USB 2.0 for maximum resolution, or 2-Lane DP1.4 + USB 3.2 for full 10Gbps data alongside video. No manual switching required.

8K@60Hz / 4K@240Hz / 4K@120Hz / 1080p@480Hz Supports the full range of high-refresh and high-resolution outputs for displays, video walls, and high-frame-rate monitors.

10Gbps Data with Full Backward Compatibility Transfers data at up to 10Gbps and works with USB 3.2, 3.0, 2.0, and 1.1 devices — drives, keyboards, and peripherals all pass through cleanly.

60W PD Fast Charging, Full Length Delivers up to 60W of charging power (tested at 20V/3A) even at the full 15-metre run, so you can power a laptop or device from the far end of the cable.

No External Power Required The DT-TF600 runs entirely bus-powered — no power injector, no wall adapter, no extra box to mount. Plug in both ends and it works.

Multi-Layer Shielded Fiber Construction with Photoelectric Conversion Chip A composite shielded fiber optic build, driven by a dedicated photoelectric conversion chip, minimizes electromagnetic interference and keeps the signal stable even in electrically noisy environments — near motors, racks, or dense cable runs.

Built-In ESD Protection An integrated electrostatic discharge protection circuit guards against static damage, adding a layer of safety for professional and industrial installs.

Zinc Alloy Shell, Gold-Plated Connector The connector housing is pressure-resistant, wear-resistant zinc alloy with a gold-plated port, built to hold up to repeated connect/disconnect cycles in daily professional use.

Tested Across Platforms Verified over a 72-hour continuous burn-in test on Windows, macOS, and Linux, with measured real-world transfer speeds of 872.92 MB/s read and 892.54 MB/s write.

Where the Type-C Fiber Optic Cable Is Used

• AV & Broadcast — Video walls, digital signage, conference rooms, control rooms, and large-screen exhibition displays that need a clean long-distance 8K/4K run without a repeater box.
• VR, Esports & Simulation — A long, unobtrusive tether from PC to headset, sim rig, or esports arena setup — no backpack PC, no battery pack, no cable drag.
• Industrial & Machine Vision — EMI-shielded runs near motors, robotics, and factory equipment where copper cabling picks up interference.
• IT System Integration — A single part number that covers video, data, and power in one cable — fewer SKUs to stock, fewer callbacks after install.
• Everyday High-End Use — Notebook screen mirroring, electronic whiteboards, mobile-to-display projection, home theatre setups, and multimedia live broadcast.

Need a shorter, indoor-only run instead? See our Type-C Series for standard-length cables, or browse Fiber HDMI Cable if your setup uses HDMI rather than Type-C. For multi-display installs, check our KVM Extender range.

Technical Specifications

Frequently Asked Questions

What makes the DT-TF600 a true Type-C fiber optic cable, not just a standard cable? A standard Type-C cable uses copper wiring and loses full video, data, or charging performance past roughly 1–2 metres. This Type-C fiber optic cable uses an active optical fiber core instead, holding full 8K/4K video, 10Gbps data, and 60W charging at up to 15 metres.

Does this cable need an external power supply? No. The DT-TF600 is fully bus-powered — connect both ends and it works with no injector or adapter.

Will it work with my laptop or device’s Type-C port? Most modern Type-C ports support this cable’s functions, but not every port supports charging, data, and video simultaneously — some support only one or two. Check your device’s Type-C port specification to confirm which modes it supports before connecting.

Can I use it for charging only, without a display connected? Yes. The charging function works independently of the video connection.

Is the cable heavy or difficult to install? No — the 6.0mm outer diameter keeps it slim and manageable for cable runs behind desks, walls, or AV racks, and no separate power box needs to be mounted.

Does it support daisy-chaining or multiple displays? No — the DT-TF600 is a point-to-point cable (one source to one display). For multi-display setups, see related DTECH extenders.

Ready to upgrade to a full-function Type-C fiber optic cable that doesn’t quit at 2 metres? Add the DT-TF600 to your cart or contact us for integrator pricing.