HDMI IP Extender 150m Over Cat5e/Cat6 | 1080p@60Hz | IR Support | DTECH DT-7043(QCW)

The DTECH DT-7043(QCW) is a compact HDMI IP Extender 150m that transmits 1080p Full HD video and audio over a standard Cat5e or Cat6 network cable. Using H.264 compression and IP-based signal distribution, it carries your HDMI source up to 150 metres without signal degradation. Connect the transmitter at the source and the receiver at the display — no drivers, no configuration required.

What Makes This HDMI IP Extender 150m Stand Out

Most passive HDMI extenders top out at 50–60 metres. The DT-7043(QCW) HDMI IP Extender 150m pushes that to a full 150 metres by using IP-based transmission with H.264 video compression — the same technology behind network video streaming. This keeps the signal stable and clear at distances where passive extenders fail.

At AED 295, it’s the most cost-effective long-range HDMI solution in the DTECH range — ideal when the installation needs distance but the budget doesn’t require 4K or KVM functionality.

Key Features of the DTECH HDMI IP Extender 150m

1080p@60Hz Full HD Over 150 Metres Transmits crisp 1080p Full HD resolution at 60Hz over up to 150 metres of Cat5e or Cat6 cable. Clear, stable video for presentations, digital signage, classrooms, and AV displays.

H.264 Compression for Stable Long-Range Transmission Built-in H.264 compression reduces the bandwidth required over the cable, allowing reliable transmission at distances that exceed what uncompressed extenders can achieve.

IP-Based Signal Distribution IP over Cat5e/Cat6 delivers consistent performance over long runs and suits integration into structured cabling environments.

IR Remote Control Support Control source devices — media players, set-top boxes, Blu-ray players — using a remote from the display end. No physical access to the source equipment needed.

Plug-and-Play — No Drivers Required Connect TX to source, connect RX to display. Recognised immediately on all major operating systems with nothing to install.

Wide Source Compatibility Works with computers, laptops, media players, set-top boxes, gaming consoles, and NVR/DVR systems.

Compact TX and RX Included Small form factor keeps the installation tidy at both ends. Cat5e or Cat6 cable is sold separately.

Where the HDMI IP Extender 150m Is Used in the UAE

The DT-7043(QCW) suits installations that need distance but don’t require 4K:

• Boardrooms and meeting rooms — Present from a laptop or PC to a large display across the room or in an adjacent space without trailing HDMI cables.
• Classrooms and training centres — Extend a teacher’s PC display to a projector or screen 100+ metres away.
• Lobby and retail digital signage — Drive a display screen from a back-room media player up to 150 metres away.
• Hotels and hospitality — Distribute HDMI content to room displays or public area screens over existing Cat5e/Cat6 infrastructure.
• Home theatres — Run a clean HDMI signal from an AV rack to a display in another room.
• Control rooms — Extend NVR/DVR video outputs to operator screens over building network cabling.

Technical Specifications

Frequently Asked Questions

Does this support 4K? No — the DT-7043(QCW) supports 1080p@60Hz. For 4K at similar distances, see the DTECH DT-7081(AST) 4K HDMI KVM Extender 120M.

What is the difference between this and the DT-7043? The DTECH DT-7043 extends up to 120 metres. The DT-7043(QCW) goes further — up to 150 metres — at the same 1080p quality.

Can I use it through a network switch? No — it is a direct point-to-point extender. TX connects directly to RX via a single cable without a switch.

Is the cable included? No. Cat5e or Cat6 is required and sold separately. Contact us for bundled pricing or project quotes.

For full technical documentation, visit the official DTECH HDMI Extender range.