DTECH HDMI Extender over Cat6 | Affordable 50m Full HD 1080p | Plug & Play | DT-7009C

The DTECH DT-7009C is a simple, reliable HDMI Extender over Cat6 that carries 1080p Full HD video and audio up to 50 metres through a single Cat6 network cable. With 3D support, plug-and-play installation, and no drivers required, it is the most affordable HDMI extension solution in the DTECH range — the right choice when you need clean 1080p extension without KVM, IR, or 4K. Transmitter and receiver included.

Why Use an HDMI Extender over Cat6

Standard HDMI cables deteriorate beyond 10–15 metres. This HDMI Extender over Cat6 solves that by routing the signal through Cat6 network cable — already installed in most offices, schools, and commercial buildings in the UAE. No new cabling needed, no drilling, no mess. Just connect the TX at the source, run the Cat6 to wherever the display is, connect the RX, and it works.

Cat6 cable is better shielded than Cat5e, reducing interference over the 50-metre run. If your building is already wired with Cat6, the DT-7009C puts that infrastructure to work for AV instantly.

Key Features of the DT-7009C HDMI Extender over Cat6

1080p Full HD at 50 Metres Transmits Full HD 1080p video and audio over up to 50 metres of Cat6 cable. Stable, clear output for monitors, TVs, projectors, and commercial displays.

3D Video Support Compatible with 3D HDMI sources — useful for presentations, simulations, gaming, and home theatre setups that output 3D content.

Plug-and-Play — No Drivers Needed. Connect TX to the source, connect RX to the display, run the Cat6 cable between them. Recognised immediately with nothing to install. No IT support required.

Wide Source Compatibility Works with any HDMI device: PCs, laptops, media players, set-top boxes, gaming consoles, NVR/DVR systems, and Blu-ray players.

Compact TX and RX Included. Small form factor units mount easily near both the source and the display. Cat6 cable is sold separately.

Most Affordable in the DTECH Extender Range At AED 130, the DT-7009C is ideal when all you need is solid 1080p HDMI extension over Cat6 — no extras, no complexity.

Where the HDMI Extender over Cat6 Is Used in the UAE

• Meeting rooms and boardrooms — Connect a laptop to a wall-mounted screen across the room using in-wall Cat6, keeping the desk clean and cable-free.
• Classrooms and training rooms — Extend a teacher’s PC to a projector or display up to 50 metres away without a trailing cable across the floor.
• Retail digital signage — Feed a display from a back-room media player through existing Cat6 runs in the ceiling.
• Hotel room AV — Route HDMI from a centralised media source to in-room screens via the building’s cabling.
• Home theatres — Connect a media player or console to a display in another room cleanly and cheaply.
• Reception desks — Show a PC screen on a lobby monitor without visible cabling across the entrance.

Technical Specifications

Frequently Asked Questions

Does this work with Cat5e cable? The DT-7009C is optimised for Cat6. For a Cat5e/Cat6 option with power over cable, see the DTECH DT-7073(2ND) POC HDMI Extender 50m.

Does it need a driver or software? No — fully plug-and-play on all major operating systems.

What if I need to go further than 50 metres? For up to 150 metres at 1080p, see the DTECH DT-7043(QCW) HDMI IP Extender 150m. Contact us if you’re unsure which extender fits your installation.

For full technical documentation, visit the official DTECH HDMI Extender range.